The Netgear extender wizard setup allows a user to set up the Netgear wireless range extender in a simple an easy way. The user can even manage all the wireless network settings of the wireless router without moving an inch. In this article, we will discuss about the Netgear extender wizard setup which is also known as the mywifiext net setup wizard. You don’t need to have an active Internet connection while accessing the Netgear extender setup wizard. The hardware setup is necessary for the whole process. So let’s discuss about the above mentioned topics.

Mywifiext net setup wizard

In this section, we will mention the instructions for the Netgear extender wizard setup. Make sure you follow the instructions carefully in order to avoid an issue.

  1. First of all, take the device out of the box and attach the antennas to it.
  2. Connect the device with the computer using an Ethernet cable. Plug the one end of the cable into the extender and another end into the LAN port of the computer.
  3. Plug the device into the power outlet and make sure the device is turned On.
  4. Now, go to your computer and open a web browser on it.
  5. On the top, you will see an address bar. Enter the default IP address of your device into the address bar and you will be taken to the Netgear router login page.
  6. You will see login fields asking for router username and password.
  7. Enter the username and password into the respective fields and click Login.
  8. Now you will see the mywifiext net setup wizard on your screen.
  9. Navigate to the Netgear extender setup wizard and the device will scan for available wireless networks around you.
  10. After the device has scanned for the available wireless networks, locate your wifi network and select it.
  11. Now, enter the security key of the network and connect to it. Security key will be asked if you have configured the wireless security settings of your wireless network.
  12. After this, follow the further instructions given by your mywifiext net setup wizard.

Now that you have completed the configuration process, make sure that you save the settings. If you don’t save the settings, your device won’t be able to make the settings take effect on it. Reconnect to the wireless range extender and run an Internet connectivity test on your extender. If you are successfully connected to the Internet, it means you have successfully hooked your device to the Internet.

So in this article, we discussed the Netgear extender wizard setup process. We also mentioned about mywifiext net setup wizard and we hope that you got to know about the whole process. In case you face any issue while attempting to set up the device, feel free to call us on our Toll-Free number and we will be more than happy to serve you.

How to connect to Nighthawk router?

Allowing you to connect your device with a low quality wireless connection is a sin on its own. Help yourself find a faster wireless connectivity and connect to a device that provides seamless network. Stream videos in 4K, play online games for hours without lag and listen to music across multiple devices in your home, all after you configure Netgear Nighthawk AC1900 router.

It’s one of the best wireless devices you can have. Once you log into Netgear nighthawk router, you will immediately notice the shift in WiFi speed, range and quality of internet service. This was made possible with the dual-band wireless channels which provide 600 + 1300 MB/s of data transfer speed.

There are numerous features of a Netgear nighthawk device. Starting from Parental controls, QoS services, cloud access and many more can be accessed and customized once you log into Netgear nighthawk router. If you are looking for answers to the question ‘How to access my wireless router?’ the below mentioned steps will help you.

But, before you can log into Netgear Nighthawk router you need to set up your new device. This includes a number of simple steps which anyone can undertake easily and you can quickly configure Netgear nighthawk router using the Genie app from Netgear.

Before you carry on these setup steps, there would be a couple of things that you need to execute first. The first thing is that you need to make a certain number of physical connections. These connections will allow the Netgear device to be connected to your home network and then subsequently allow you to easily configure Netgear nighthawk.

These basic steps include:

  • Install the antennas provided with the device itself and connect them to the available slots.
  • Pick up an Ethernet cable. Connect it to the LAN port of the modem to the internet port of the Netgear Nighthawk router.
  • You may turn on your Netgear Nighthawk router now.
  • Use a PC or a Laptop to log into Netgear nighthawk router and to set it up. You can do this in 2 ways. One, you can use a wired connection by connecting the Netgear Nighthawk router to the computer using an Ethernet cable. The other would be entering the default SSID of the router and the password to connect to the wireless network shared by it. In case you have an issue doing that, call us on our toll free number. Our technicians are well-versed in setting up Netgear routers. Note that a wired connection is always preferred over a wireless one.

Making all the physical connections, you would now be needed to set up the Netgear Nighthawk device. For that you need to use the PC or the Laptop that you have connected. Simply follow the below mentioned steps:

nightwalk setup

  • Step 1: Open a web browser from the PC or Laptop you have connected. Use the IP address or or use the web-address which we will use to log into Netgear nighthawk router.
  • Step 2: Once the default login page opens up, you will be prompted to enter the admin credentials before you can configure Netgear nighthawk. These credentials by default are as follows: Username is ‘admin’ and password is ‘password’. It is recommended that once you log into Netgear nighthawk router, you change these default credentials to whatever you like.
  • Step 3: Go to the Setup Wizard option to begin the router installation process. Click continue to begin the Netgear Nighthawk router setup
  • Step 4: Step by step, the router will ask you to setup the many facets of the router. This includes, from starting, the internet connection type, the SSID of both the wireless channels, the default password, the SSID passkeys and security standards that your router will be using. If you face any issue while installing the device, you can call us on our toll-free number. Our technicians can help you setup and connect to your Netgear Nighthawk router. You can also chat live with them in the chat window provided below.

With the above-mentioned steps you will be able to effectively Configure Netgear nighthawk router. Once the setup is complete, use the new admin login credentials to login to the router whenever you want. Use the login IP or web address each time you have to connect to your Netgear Nighthawk router.

Those were the simple steps to login and to setup Netgear Nighthawk router. If you have any other questions regarding your Netgear Nighthawk router, call us on our toll-free number. Our router specialists can help you resolve all your issues and will have answers to all your queries. You can also chat live with us in the chat window provided below.


Got a new Netgear wifi range extender? Congratulations on your smart purchase. Netgear wifi extenders are known for their performance and cost-effectiveness. They effectively increase the throughput of your existing wireless networks. You can use these wifi extenders at your home and even in offices. Want to know about the Netgear wifi extender setup? Don’t worry, we will discuss the process of Netgear wifi extender setup in this article. We have put together some of the basic steps to set up the new wireless range extender device. Setting up the range extender is a very easy task but you need to make sure that you follow the steps very carefully.


setup netgear extender


In this section, we will discuss about the Netgear wifi extender setup. We have provided the instructions below:

  • First of all, take your new wifi range extender out of the new package and place it on the table.
  • Tilt the radio antenna and connect the wifi range extender to the computer.
  • Take the RJ45 Gigabit Ethernet cable to connect the device to the computer.
  • Plug the one end of the Ethernet cable into the LAN port on the device and plug another end into the LAN port on your computer.
  • Now plug the range extender into the power outlet near the location where you experience the dead zone. Dead zone refers to the zone where the wireless signal of the network is weak.
  • Now go to the computer and launch any of your favorite web browsers.
  • Look at the top of the homepage, you will see an address bar. Enter the default web address of your wireless range extender into the address bar and click Go.
  • The browser will take you to the Netgear wifi extender login page where you will see a small login window asking for device login credentials.
  • Enter the device username and password into the fields and click Login.
  • Now you will be directed to the Netgear wifi extender setup page.
  • Scan for the active wireless networks and locate the home wifi.
  • Connect to your wireless network. Enter the wireless network passphrase if prompted and you will be connected to the wireless network.

Now that you have connected the wifi extender to the wireless network, you need to set up the wireless security configurations same as that of the wireless router. If you want to configure the security settings of your extender separately, you can do that manually, but in this case, you will need to connect to the extender manually when you are far from the network range of your router.

So this was the tutorial about Netgear wifi extender setup. We hope that this article helped you to set up the new wireless range extender easily. If you face any issue at the time of setup process, you can call us freely on our Toll-Free number and we will be more than happy to assist you.

Smart Strategies to Setup Your Netgear Range Extender

It is quite possible that you don’t get Wi-Fi signals even after setting up a quality router in your home/office. The problem is not with your router but with the interferences present in your home network. It is a common issue but can be solved easily with the help of range extender. Range extender or we call it boosters also is a device that takes signals from the key router & replicates it for a wider range. Most of the Range Extender works same. So, setting up a range extender in your home network is not a bad deal. What you require is setup your range extender properly. Place it in a way so that your each device can acquire signals effortlessly. In our today’s blog, we will try to solve your queries regarding extender. Along with this, we will also look at the issue related to extender web address We are working at customer support get a number of queries on daily basis. The main concern that comes out from the majority of the users is how to setup extender for stable signals. So, without wasting any more time, let’s get started now for setting up range extender

How to Place Netgear Range Extender?

  •    It is important to place range extender well before you start setting up your extender.
  •    Place your Netgear extender amid between your extender & wireless devices which are placed outside router range.

  •    Next, power your extender into an electrical socket and wait for about 1 minute until your extender gets start. Check if status LED turns green or not?

Connect Netgear Extender to Available Wi-Fi Network

Once you place extender at the chosen place, next you need to connect it to the Wi-Fi network. We will connect extender with web browser setup by using web address for extender login. Your computer requires either connected wirelessly or wired to the Netgear extender to access this web address

  •    Begin with using wireless network manager on your Computer & discover & connect to Netgear wireless network.
  •    Once you established connection with Computer or Computer to extender  
  •    So, initially take a computer or wireless device & open a web browser on it.
  •    Now, visit by entering it in web browser address bar.
  •    The browser will take you to the setup guide on screen.
  •    Here, you can modify settings as per your preferences.
  •    You can choose Wi-Fi network that you wish to lengthen.
  •    Next, you require entering security password of the available network. Not only this, you can also choose a name for your fresh extender network.
  •    Connect your wireless devices to your brand new extender network.

If you have any question regarding above-given steps then give us a call on the toll-free number. We have a team of experts that is available 24/7 on the toll-free number to assist Netgear users. You can also do live interaction with the team. For this, you only need to approach team for live chat support. You every query will get an answer when you post comments in the comment box. Our experts revert back to your query in no time.